Jump to: navigation, searchmacOS 10.5.5 Hardware Compatibility
*Hardware Components
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
* ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
* Please add hardware into tables.
* This is for 10.5.5 builds only.
*It's clear, putting MacOS-X on an ordinary PC is a hassle and probably also good so - as that OS is really meant to run on Apple made hardware, and there it runs like a charm. For myself I keep iDeneb 1.3 (MacOS-X 10.5.5) running for some more time, and then choose an alternative, e.g. Either iPC-OSX86 or going for the awaited Kubuntu 9.10 again.
*17 thoughts on “ How to Create a Bootable OSX USB Key ” Dagmar August 16, 2009 at 4:28 pm. First of all I want to thank you for putting this together! I have recently (3 weeks ago) purchased the.
For how to edit the Wiki, please see this thread. Thank you!
I have “passwrd: command not found” in ideneb 1.3, when i type “passwrd root” to config setup.do u have an idea. IDeneb v1.3 10.5.6 is a dvd universal for Intel/AMD with support for SSE2. Developed by Layne, Cri900. This relase is based on Mac OS X Leopard 10.5.6. Changelog v1.3 to v1.4: This version include Mac OS. IDeneb 1.3 on a 1000H Forum » Support / Installation » iDeneb 1.3 on a 1000H Started by: stormbreaker Date: 01 Dec 2008 23:17 Number of posts: 7 RSS: New posts.
You're looking for an Installation guide? see here
*1Motherboards
*2Processors
*3Graphics Cards
*3.1AGP
*3.2PCI Express
*4Network Cards[edit]Motherboards[edit] Abit Hardware NameChipsetNotesEFI/Vanilla kernel workingFully Working w/o PatchIP35 ProIntel P35 & ICH9R
*Install Method: Retail Disc with Boot-132.
*Patches: Audio needs this codec dump and applied using AppleHDAPatcher v1.20.
*What doesn't work: Shutdown/Restart rarely works, and will not wake from sleep.
*Can also follow the IP35-E instruction below(using iAktos 5i)EFI v8 and CameleonNo; Audio needs patching.IP35-EIntel P35, ICH9R, ALC888 audio, Yukon 88E8056 lan
* Source: iAktos 5i (10.5.5, upgradable to 10.5.6).
* Installs fine on IDE optical drive to a SATA HDD.
* Do install procedure in following order:
* On iAktos 5i (10.5.5) install DVD, check box the following only: cameleon, dsmos, AppleSMIBIOS-28, Stock ACPI modified, APIC Driver, disabler.kext, Intel SATA, JMicron.
* Patch video card as appropriate (OsX86Tools may work okay at this point).
* Update to 10.5.6 with this procedure [1] (follow procedure exactly).
* Audio: works 100% with this patch [2], do this only after 10.5.6 update.
* LAN: works 100% with this patch [3], do this only after 10.5.6 update.
* Use OsX86Tools to enable Quartz Extreme...but don't use OsX86Tools to download & install NVinject, this bricked my machine twice.9.5.0 voodoo kernel, EFI v9, Cameleon 1.0.12Yes, almost all functions working (lan, audio, usb, shutdown/restart, time machine) but only after following the procedure outlined here.
Unable to wake from sleep (even with current bios ver. 18). Have not tested PS/2 ports. Needed to install a SATA DVD burner to rip/burn DVD/CD's without getting kernal panic. Also, needed to use the ToH 9.2.0 kernel [4] in order to successfully launch Parallels without kernel panic.IX38 Quad GTIntel X38 / ICH9R
* iAtoks 5i with: PC EFI, Appledecrypt, SMBIOS-EFI, 9.2.0 TOH Kernel, APCI Driver, Disabler.kext, Remove Thermal, Intel AHCI sata, Jmicron, Realtek R1000
* Audio worked with ALC888 driver here [5]
* Used Stationapollo_ICH9 Patch to get sata to work (i used ide HD to install), had to repair permissions, and boot with -f and/or -x till it worked fully.
* Have a NVIDIA GeForce 7300 SE used NVKUSH on iAtoks disk. have full QE and Core support.9.2.0 TOH KernelMost of the stuff works, Sleep didn't so i just disabled it, lan, usb, screensaver, audio, and ps/2 keyboard all working. Have not tested time machine. See's all 4 of my quad core.[edit] Asrock Hardware NameChipsetNotesEFI/Vanilla kernel working EFIFully Working w/o Patch4COREDUAL-SATA2VIA PT880 Pro/PT880 Ultra
* Install Method: iATKOS v4 (didn't work), iDeneb 1.3 10.5.5 (didn't work), Kalyway 10.5.2 w/ TheStevo Patch (didn't work), XxX x86 10.5.5 Leo Install Disc Beta1 (needed to boot DVD with cpus=1 Success!! Latest iATKOS v5i (needed to boot DVD with cpus=1 works)). Success with Voodoo 9.5.0 Kernel.
* BIOS Version: 1.90 (2.10 does not work); Board Revision: 1.0.
* BIOS setup options: CPU FSB Timing set to Manual to fix timer calibration error, Manual DDR RAM Settings, Disabled Serial, Parallel & MIDI Ports, No-Excute Memory Protection = Enabled, HPET Table = Enabled.
* Audio: Realtek ALC888 (with iAtkos PC-EFI V9, worked without patch. Used the ALC888 kext as well for more functionality).
* LAN: VIA Rhine II using VIARhine.kext
* SATA & IDE: SATA onboard but did not test. IDE works fine.
* Optical Drive: LG DVD-Writer works fine.
* Do shutdown, reboot and sleep work? Yes
* VGA card reads as PCIPC-EFI v9 works sort of. Long boot time. Chameleon bootloader is much faster. Voodoo 9.5.0 Kernel.NoP43Twins1600Intel P43
* Requires modified BIOS (2.0) from: [6]* Used iATKOS 5i* Flawless install. Recognized all 8GB of RAM as well as both cores of my Core 2 Duo E8400.SATA AHCI works with the Intel ICH driver as well as JMicron PATA. Onboard LAN works OOB. Shutdown/reboot functions as it should.PC-EFI v9 works without issue. Stock kernel.No
(see notes)P4I65GIntel® 865G + Intel® ICH5
*Install Method: IDeneb 1.3 OSX 10.5.5
*Bios: Set Default
*CPU: Intel Pentium [email protected]
*Ram: 1.5GB DDR
*Video:Nvidia FX5200 128mb
*Audio:AC'97 5.1
*Optical: LG DVD-ROM Drive
*Lan:Realtek PCI LAN 8101L
*IMPORTANT:BEFORE STARTING THE INSTALLATION DISABLE THE LAN IN THE BIOS, AFTER THE INSTALLATION ENABLE IT(The install crash if you don't)
*Patch
*Audio: AC97 audio
*Chipset: ICHx fixed
*Kernel: 9.4.0 stageXNU
*Fix:
*IOUSBFamilyFix
*AppleSMBIOS: AppleSMBIOS 800
*Video: nVidia----- NVinject 0.2.1 128Mb
PC-EFI v9 works without issue.Kernel 9.4.0 stageXNU
No (See Notes)P4i45G R5.0Intel® 845GV
*Install Method: iATKOS 5i OSX 10.5.5
*Bios: Set Default
*CPU: Intel Celeron D 325 2.5GHz
*Ram: 1.5GB DDR (333 Mhz)
*Video:Nvidia FX5500 256MB
*Audio:AC'97 5.1
*Optical: LG DVD-RAM Drive
*Lan:Realtek 8139
*Patch
*Bootloader: Chameleon
*Audio: AC97 audio
*Chipset: Intel SATA
*Kernel: 9.5.0 Kernel Voodoo
*ACPI: APIC Driver
*Fix:
*IOUSBFamilyFix
*Video: nVidia -- Titan
*Network: Realtek 8139
Chameleon + 9.5.0 Kernel Voodoo
No (See Notes)[edit] Asus Hardware NameChipsetNotesEFI/Vanilla kernel workingFully Working w/o PatchP5VDC MX
* VIA P4M800 PRO (north)
* VIA VT8251 (south)
* Realtek ALC653 AC'97 Audio (Not working)
* VIA UniChrome Graphics (untested)
* 'iATKOS v5i' Installed packages
* AppleDecrypt
* SMBIOS-EFI
* AppleSMBIOS netkas
* x86 ACPI
* Disabler.kext
* VIAATA driver
* VIA Rhine driver
* EFI V9
* 9.5.0 voodoo
* 9.2.0 ToH
* Realtek RTL8201CL LAN (Via Rhine kext)
* SATA
* IDE
* USBP5K-SEIntel P35 + ICH9
* Install Method: Kalyway 10.5.1->10.5.3->10.5.5->10.5.6(via software updates)
* BIOS Version: latest
* Realtek ALC883 working via AsaliaAudio(output)->AppleHDA.kext (patch at link).
* Attansic Gigabit (kext included)
* SATA: ICH9 controller works fine(kext included).
* PATA: Marvell 6111 controller works fine(kext included).
* USB: all workingChameleon 1.0.12 + Original Apple 9.6.0 kernelYes. Restart, Shutdown, and Sleep work. Quad core and 4GB RAM working. OpenHALTRestart.kext working.P5K Deluxe WiFi APIntel P35
* Install Method:BOOT 123 CD IMAGE (link), RETAIL 10.5.4 DVD
* 9.5.0 vanilla kernel
* BIOS Version: 812
* MAC OS X 10.5.6 COMBO UPDATE (link)
* DSDT Patcher GUI (link)
* UNIVERSAL OSx86 INSTALLER (link)
* Audio AD1988B 8 - Channel High Definition Audio CODEC (link)
* Wireless P5K Deluxe/WiFi-AP (link) BUGGY CAUSES RANDOM PANICS..DISBALE AND USE ONBOARD ETHERNET
* Fix Orange Drives AHCIFixv2 (link)
* Fix Sleep with AppleUSBUHCI328.kext.zip kext (link)
* Kext Pack Installer from this guide (file)
* Installation Instructions:
* Boot with 'BOOT 123' CD, After loading press 'F8' then 'ESC'
* Replace disk with Retail DVD and press 'Enter' twice.....long boot time...be patient!
* Open Disk Utilities and setup your install disk as 'GUID'
* Selece printer driver in the install options and continue install...
* You will get an error when the install completes...Ignore it and reboot.
* Boot with 'BOOT 123' CD, After loading press 'F8' then 'ESC'
* Enter the number '80' if OSX installed on the first drive, or enter '81' if installed on the second drive and 'Enter'. This is the order your motherboard boots your hard disks.
* You will see the initial video for OSX
* Run the 10.5.6 Combo Update<Proxy-Connection: keep-alive
Cache-Control: max-age=0
...DO NOT REBOOT...JUST MINIMIZE</b>
*
* Run the 'DSDT Patcher GUI'...Select 'MAC OS X', Select your boot drive, click 'Run DSDT Patcher'
* Run the 'Universal OSx86 Installer' and choose the following
* Choose the hard drive to apply to
* Set the boot time....only if you care to have the bootloader count down
* Check 'Apply Kext Package'
* Set Native Boot Resolution (mine is 1920x1200)
* Check 'Install PC_EFI_V9 Option...VERY IMPORTANT
* Check 'Apply Ethernet EFI String'
* Check 'Apply EFI String for Video Card' (Select Your Model)
* Press 'Install'
* Install 'P5K-SE_10.5.6.pkg'
* Install 'Taruga_AD1988b_rev3_Installer' Sound
* Install '87_Mac10.4_v1309' Wireless...I wouldn't if I were you. Will make your system unstable.
* Reboot...W/Out 'BOOT 123'
* Run the 'Universal OSx86 Installer' again and this time only choose the following
* Check 'Apply Ethernet EFI String'
* Check 'Apply EFI String for Video Card' (Select Your Model)
* Check 'Install Custom Kexts from HD' (Browse to kexts and select)
* Press 'Install'
* Reboot
* Open 'OSx86Tools' and click 'Enable/Disable Quartz GL' to verify if enabled...if not, enable.
* Goto 'System Preferences, Sound, Output and select 'Line Out'
* Follow link above to fix orange drive icons if it bothers you. It's only cosmetic.
* Run Update and update everything
*DONE
NOTE: Here is a zip archive of all the files you will need including my BIOS SETTINGS. You still have to download the combo update 10.5.6, Wireless driver, and purchase Leopard Retail 10.5.4.PC_EFI_V9 and Vanilla KernelFully 100% Functional with Sleep,Shutdown,Restart,etc.,etc. P5K Deluxe WiFi AP or P5K Premium Wifi AP Intel P35 + ICH9R
* Install Method: Idened 10.5.5
* AD1988B Audio: works
* Marvell 88E8056 LAN: works
* Realtek RTL8110SC LAN: works
* Onboard WiFi: Realtek driver
* ICH9R SATA: works
* e-SATA: working, but set AHCI mode in Bios
* Jmicron PATA: not tested
* USB: Works EFI v9 + Vanilla working Shutdown, Restart, Sleep working.P5B-V,P965, ICH8, JMicron JMB363
* Instalation method: iDeneb 1.3
* P695 works OOTB
* ICH8, JMicron - works with patches: ICHx, JMicron (from iDeneb DVD)
* SATA Devices - works, IDE Devices - unknown
* LAN: Marvell 88E8001 - works with patch: Skge Marvell (from iDeneb DVD)
* Audio: AD1988A - unknown
* USB - works OOTB (to use front ports disable USB Legacy in BIOS)
* Onboard GPU: GMA X3000 - no CI/QE, posible resolution change with patched X3100 kext (not included in iDeneb DVD)PC_EFI_V9, 9.5.0 Vanilla KernelNeed patches.
Onboard GPU not fully working.P5W DH DeluxeIntel 975X Express Chipset
* Installation method: Kalyway 10.5.1 Vanilla Kernel + kalyway 10.5.2 combo update + Kalyway 10.5.3 combo update + 10.5.4,10.5.5 original package combo update with this guide: http://netkas.org/?p=50
* SATA: works
* IDE: works
* LAN: Works OTB
* Audio: Works OTB.
* Wireless: Included patch makes some problem , resolved with new RTL8187L driver from Realtek site
* USB: All ports works OTB
* Firewire: Works OTB
* EFI V9
* Vanilla KernelAlmost everything works out of the box
P5GC-MX/1333945GC (A2), ICH7
* Installation method: iATKOS i5 (10.5.5)
* Intel 945GC (A2): works OOTB
* ICH7: works OOTB.
(Selected ICHx AHCI kexts during install.)
* SATA: works
* IDE: works
* LAN: works OOTB with this kext [7]
(Used a cheap Realtek 8139C PCI, works OOTB)
* Audio: Works OOTB.
(Select ALC883 during install (or try ALC662). Shows up in System Preferences as HDAudio, but not in System Profiler. Two channel stereo out works, no input options available though.)
* USB: All ports work OOTB
* Onboard GPU: Use the vanilla 10.5.6 GMA950 kexts and this patched DSDT (Core based CPU required.)
* Power: Shutdown, reboot, and sleep work 100%
(Hint: Switch the PS2_USBPWR jumper on the motherboard to enable sleep.)
* EFI V9
* 9.5.0 voodoo
* 9.2.0 ToH
* Vanilla untestedNo, but very close! You'll need another NIC, and another GPU if you don't have a Core based CPU.M2VVIA K8T890, AMD Hammer
* Installation method: iDeneb 10.5.5 v1.3 (10.5.5)
* SATA work OOB (Selected VIAATA kexts during install.)
* IDE: works
* LAN: works (Used Attansic L1 kext, get it here)
* Audio: Works. (Select Azalia during install. Only 2-channels)
* USB: All ports work OOTB
* Power: Shutdown, reboot, and sleep work 100%
* EFI V9
* Kernel 9.5.0
* Vanilla untestedNo, Audio and Lan needs patchingP4B533Intel i845e
* Installation method: iDeneb 10.5.5 v1.3 (10.5.5): Kernel 9.4.0; Fixes: ICHx;
* Pentium 4, 2.4 GHz, SSE2, Northwood, 1GB RAM, 80GB Harddrive (20GB HFS, 60GB Fat32, had to set 1. partition active)
* IDE: works
* LAN: not tested
* onboard C-Media works with CMI8738PCIAudioDriver.kext
* USB: OK
* Power: Shutdown, reboot
* Graphics: ATI Radeon 9200 - in VESA Mode 1280x1024
* AppleSMBIOS netkas (default)
* Kernel 9.4.0 WLAN, LAN don't work yetP5N-DnForce 750i
* Installation method: iDeneb 10.5.5 v1.3 (10.5.5): Kernel 9.4.0 SageXnu
* Boot in safe mode (-x) without any LAN, Audio, Video drivers.
* SATA: Works, with patched NforceATA drivers
* IDE: works
* LAN: Works latest nForceLan drivers
* Audio works with ALC883
* USB: OK
* Power: Shutdown, reboot
* Kernel 9.4.0SageXnu, 9.5.0 Not tested P5KPL-AM SEIntel G31, Intel ICH7
*install using iAtkos i5, no patches neededAudio, LAN and everything works perfectly fineAsus A8V DeluxeVIA K8T800PRO
* Installation method: iDeneb 10.5.5 v1.3 (10.5.5): Kernel 9.4.0 SageXnu
* SATA: not tested
* IDE: works
* LAN: Works with skge Marvell selected from the installation dvd
* Audio works with AC97 AUDIO selected from the installation dvd
* USB: it works but non perfectly (iousbfamily kext)
* Power: Shutdown, reboot ,all work
* Kernel 9.4.0SageXnu, 9.5.0 Not tested [edit] Dell Hardware NameChipsetNotesEFI/Vanilla kernel workingFully Working w/o PatchGX240Intel ICHEverything works except AGP Geforce 6200 DONOT USE AGPGART!.
Installed using iDeneb v1.3 10.5.5 using only the following:
*Select AC'97o
*Select JMicron ATA
*Select Intel Chipset
*Select Kernel 9.4.0 Stage XNU
*Used NVinjectGO for Geforce 6200 AGP (Normal NVinject Wouldnt Work use titan.kext also and download Nvidia Universal Installer.mpkg install all and reboot QE!
*Select any other drivers that are available that may go with your hardware.Install and enjoy! VERY easy install.Yes
*Kernel 9.4.0 Stage XNU tested Yes,.
*Intel Celeron 2.0 Ghz
*Onboard ethernet works
*PCI slots work Sound Blaster Pro (Shows up as AC'97)
*USB works
*IDE works
*Audio works!
*Sleep, Shut down, Restart work[edit] ECS Hardware NameChipsetNotesEFI/Vanilla kernel workingFully Working w/o PatchG31T-MIntel G31 + ICH7Works flawless with the following bios! http://rapidshare.com/files/151444960/ECS_G31T-M_PCB_v1.0.rar.html. Installed with iATKOS v5 and selected only; base, dsmos, PCEFI 9, SMBIOS- EFI, vanilla kernel (select none), removed thermal kexts and Disabler.Kext. I used gfxutil to build EFI strings for my Nvidia Card. Boots in 10 seconds after install! I have not tested the onboard Intel graphics cardYesYes - After patching audio...ECS P965T-A Rev 1.0BIntel P965 + ICH8 (+ JMicron JMB36x)In BIOS, enable AHCI IDE, disable all CPU throttling, C1E, and power management, and strip out all SATA devices (used JMicron IDE only).Installed iATKOS v5i (10.5.5) base, dsmos, PCEFI 9, EFI SMBIOS enabler, vanilla kernel, removed PowerManagement and Disabler.Kext, added OHR.My nVidia card works using Graphics Update, Realtek RT1000 (sic?) drivers got Realtek working, and sound outputs ok.YesNo - HDA mic missingECS 945P-A v1.1Intel ICH7
* EFI v9
* Kernel 9.2.0
* Kernel 9.5.0 voodoo (ocasional freeze up)Not fully workingECS 915P A2 V7.1North: Intel 915P South: ICH6
* Install Method: iAtkos 10.5.5
* Audio: Realtek ALC655, (Working great with patch from DVD)
* LAN: Realtek 8100c, (Working great with patch from DVD)
* SATA & IDE: Odd shutdowns during intense disk activity with SATA enabled. Used IDE hard drive and disabled SATA in the BIOS.
* Optical Drive: Philips DVD+/-RW 8631
* Shutdown and reboot work great, no video on resume from sleep. (May be an issue with my install.)
* Working great with Celeron D 3.33ghz and 7300GT graphics. May try other drivers/kernels in the future to try to fix the SATA issue.Using the Voodoo 9.5.0 kernel with Chameleon.Only issue so far is SATA. Patches for PS/2, Ethernet, Sound all work great.ECS A770M-AAMD 770 (AM2/AM2+)Everything works except IDE (can't see IDE DVD-ROM or IDE hard drive). I haven't tested multi-channel audio, but I am getting 2-channel audio (board supports 8-channels).
Installed using iDeneb v1.3 10.5.5 using only the following:
*Select AMD patch
*Select ALC 883 Audio
*Select JMicron ATA
*Select VIA-SB Chipset
*Select Kernel 9.4.0 Stage XNU
*Select Firewire Remove
*I selected also X1300-X1550 Graphics drivers since I have a PCIex16 ATI X1550 card, works great!
*Select any other drivers that are available that may go with your hardware.Install and enjoy! VERY easy install.Yes
*Kernel 9.4.0 Stage XNU tested (didn't try others since this one worked on first tryYes, other than the IDE.
*Recognizes the Athlon 64 X2 4800+ as 2.5Ghz Unknown
*Onboard ethernet works
*PCI slots work (recognized my D-Link DWA Extreme N wireless card OOB)
*USB works
*SATA works
*Audio works!
*Sleep, Shut down, Restart work[edit] Gigabyte Hardware Name (alphabetical)ChipsetNotesEFI/Vanilla kernel workingFully Working w/o PatchGA-EP45-DS3LIntel P45 ICH10This board is very compatible. It works nicely with 10.5.5, and 10.5.6. With 10.5.6, sleep shuts down the computer, that is the only bug so far. Other than that you can perform a full retail fresh 10.5.6 install with a real retail DVD with this guide. The guide uses a Core2 Quad 2.66, all hardware works fine except there are advantages to using the recommended network card.YesYes, with supplied kextsGA-EP35-DS3 rev.2.1Intel P35 ICH9This board is very nice and compatible. I have E8400 on it with 7 GB of RAM currently, two SATA disk, one PATA disk. I used iATKOS 10.5.5i to install from an ATAPI DVD drive. Just as the manual of iATKOS suggests, I used the PC EFI v9, default SMBIOS Enabler (the one for desktops), default Decrypter, stock kernel, x86 ACPI driver (because i had a PS2 keyboard and mouse), Disabler, Remove Thermal Kexts, Intel SATA non-AHCI (you could go with AHCI, but i have old XP here too on another disk and that's just me), OHR to fix the shutdown/restart issue, a driver for the Ethernet adapter RTL 8111B. As i was an idiot enough to buy a 8400GS card from Asus, i had to try many times and finally NVkush from the iATKOS DVD proved very good, QE/CI work. The only thing that I can't get to work is the ALC889A audio. Tried some solutions but none of them worked. But i'm too lazy for that and as i have a SB Extigy at hand, i will go with it because i read somewhere that it works. Oh, and i have installed the NTFS driver from iATKOS DVD and it works very well too (no problems with old drives that i have connected - all work fast and stable).YesYes, tho i can't figure out how to make the ALC889A audio come alive.GA-EP35-DS4P35 + ICH9RRetail intall 10.5.2 using the Ls8-method described in this thread [8] then did an software update to 10.5.5yesonly sleep wakeup needs patch -do not work with keyboard or mouse, see post for install intructions...GA-EP45-UD3PP35 + ICH10RRetail intall 10.5.2 using the mthod described in this thread[9] then did an software update to 10.5.5;yessound needs patch, see same post for install intructionsGA-EP35-DS3PP35 + ICH9RHardware:
*AHCI enabled, JMicron enabled
* SATA DVD & HDD drives
Installation:
* Vanilla 10.5.0 updated to 10.5.5
* Netkas v9
* Kexts & patches:
* Used LTL's Guide including LTL's pre-patched AppleHDA.kext for sound (ALC889A)
Sound Output Configuration: Select Internal Speakers in System Preferences for line out (sound output mapping issue?) yesYes, see notes for configuring sound outputGA-G31M-S2LIntel® G31 + ICH7 ChipsetInstalling iDeneb v1.3 - 10.5.5 Leopard OS x86 DVD:
* Kernel section: SpeedStep (Intel/AMD/SSE2/SSE3);
* Chipset section checked: ICHx Fixed
* Fix section checked: ACPI-Fix; Cpus=1-Fix.
Hardware:
* SATA DVD & HDD drives
* onboard VGA card
* onboard sound card (disabled in bios)
* onboard Ethernet card (disabled in bios)
* PCI phir. (enabled in bios)
* USB mouse
* Ethenet PCI RTL8139D
* Firewire PCI 400 VIA VT 6307
* GF 8400GS 256MB
NB: install system with PCI cards but without GF8400gs, then during 1 restart take out the PCI Ethernet card, then register system > go to network settings, look at hardware: Firewire there is!!! andmake the second restart, during the 2 rr. put in motherboard Ethernet card, when you are in system, go to network settings, there must be available Your ethernet and FireWire both.Then downlaod kext for GF8XXX, install with kexthelper, and make 3rd restart. During the restart put your VGA GF8400 card in, and reconnect vga cable from onboard intel vga to external GF8400. I hope you will have success! Not sure (for me it was failure)Did not try, i had Fireface 800 (install original drivers for MAC OS X from Fireface webpage)Ga-ma78gm-s2h700 SB + 780 ChipsetInstalling iDeneb v1.3 - 10.5.5 Leopard OS x86 DVD:
* Kernel section: SpeedStep (Intel/AMD/SSE2/SSE3);
* Chipset section checked: None
* Fix section checked: None.
Hardware:
* SATA DVD & HDD drives
* X1950 Pro (Asus)
* onboard sound (disabled in bios)
* onboard Ethernet (disabled in bios)
* USB Keyboard
* USB mouse
* Enabled AMD cool and quiet
* SATA set to AHCI Not Sure Still Making modificationGA-X58A-UD3R Rev 2.0 (FF Bios)Intel® X58 + ICH10R ChipsetInstalled Kalyway 10.5.2, then updated to 10.5.5:
* Kernel section: Kabyl 64bit (Intel/AMD/SSE2/SSE3);
* Chipset section checked: None
* Fix section checked: None.
Hardware:
* SATA DVD & HDD drives
* XFX HD5770 (does'nt work OOB, use GMA Drivers while install)
* onboard sound (not working OOB, use AppleHDA.kext)
* M-Audio Delta 192 (not working OOB, use Envy24HT)
* onboard Ethernet (works OOB)
* USB Keyboard
* USB mouse
* SATA set to AHCI No, Vanilla not working Sleep, restart needs patch. Use 'update' flag while booting.[edit] Intel Hardware Name (alphabetical)ChipsetNotesEFI/Vanilla kernel workingFully Working w/o Patch Intel D945GCNL
* Intel Dual Core Pentium, 2.2 GHz
* Chipset - Intel ICHx (iDeneb 10.5.5)
* Audio - No Selection
* Ethernet - No Selection (Works Fine)
* SMBios - Patch 667 (iDeneb 10.5.5)
* Method of Install: OSX86 iDeneb 10.5.5Working EFI, Vanilla Kernel
* Did not test onboard video
* used nVidia GeForce 8600GT 512MB - NvInjector 512mb (iDeneb 10.5.5)
* Patch audio with package from (iPC 10.5.6 Final - ALC888)Atom 3300Intel BOXD945GCLF2Installed into old G3 Tower CaseEFI workingYes. All hardware functions including audio out, however the microphone port does not work. This is stock 10.5.5 from iatkos 5i DVD. The Dual Processor Atom 330 1.6ghz is rather snappy for a $85.00 motherboard CPU Combo.DP35DPIntel P35 + ICH9# Install Method: Kalyway 10.5.2 DVD, then install 10.5.5 update, after that install the driver(s)
* Audio Sigmatel STAC9274D Working with Apple HDA Patcher 1.16 and STAC9274D codec dump available at insanelymac forums
* LAN Intel Gigabit Ethernet working out of box
* USB working out of box for all ports and all devices
* FireWire works out of box
* IDE working, SATA controller working in AHCI mode, Native, detected as ESB2 or Unknown AHCI controller
* According to the IO Registry, some devices are not working, but everything works fine
* Optical drives, harddrives, ram and all pci slots work
* Installs from SATA DVD DriveWorking EFI, Vanilla KernelAudio Requires PatchingDG35ECIntel G35 + ICH8#Install Method: iAktos 10.5.5 DVD
*Audio ALC888S Working with Apple azalia In-built Codec. No need to install any audio patch.(If in iAktos 5i)
*LAN Intel® 82566DC Gigabit Ethernet Controller needed Intel82566MM.kext.
*Intel E7200 @ 2.53Ghz Detected as Core2Duo @2.53Ghz unknown.
*USB,FireWire Working OOB.
*SATA Set to AHCI. Working flawlessly.
*DVD drive On SATA is ready For installation and USE.
*PATA working.
*XFX 8600GT XXX work.With Nvkush and Efi-Strings.
(i am Not Getting 1366x768 in My 16' Widescreen Monitor.)
*iAktos 5i vanilla 9.5,Voodoo 9.5,fassl 9.5 kernel not working Choose 9.2 Toh kernel or Patch iDeneb 1.3 vanilla 9.5 kernel.Working Efi. Not iAktos 5i Vanilla kernel but iDeneb vanilla Kernel Works.ALC888 doesn't work 865GSA Intel 865GSA original Mobo #Install Method: iAktos v5i 10.5.5 DVD
*Audio: Realtek AC97 works w/o patch
*LAN: Realtek RTL8139 -Select RTL8139 from the List
*Intel Pentium D 805 2.66 GHZ- Select SMBIOS'S DRIVERS - Apple Imac Driver
*Kernel -9.5.0 Voodoo
*ACPI - APCI option
*Disabler
*SATA- Intel SATA option
*VGA - Nvidia FX5500 256 MB- Titan Driver-1920x1080p resolution
*BootLoader- Chameleon v1 All Working (Sleeps, Restarts and shutdowns properly) Mainly SMBIOS , Network needs patching.. Audio doesn't need it..Audio works perfect OTB with iAktos[edit] MSI MainbordChipsetNotesEFI/Vanilla kernel workingFully Working w/o PatchMS-163A (notebook model)Intel
* Install Method: Kalyway 10.5.2->10.5.3->10.5.4->10.5.5 (via software updates + shell script)
Everything is working fine, except sleep, all the PS2 audio in/out plugs and AirPort (using USBWirelessUtility instead).Yes.Yes. Centrino Duo and 4GB RAM working.
MainbordChipsetNotesEFI/Vanilla kernel workingFully Working w/o PatchMS-7046 Rev 1.00 (ADVENT-MEDION OEM BOARD)Intel ICH6
* So, this little one was a right bugger to deal with, but i have got this working, infact im writing this on it now.
So what we have here is OEM Board from MSI its a generic brand, but its usually found in Medion or Advent Desktop PCs.So how to install? Simple, Download the iDenib OS X 10.5.5 distro, burn it, plop it in the drive, run the install in verbose mode '-v'when you hit the installer, prepare your HDD, i have XP and 7 Triple booted, with dual bootloading just in case ;), once your in your customise settings....Choose Azailia Audio, Your GFX, this is running Nvidia 8500GT 256MB, with 1GB DDR SDRAM, P4 HT 550 3.4GHz, dont choose any smbios, choose ich for chipset, choose viarhine for onboard ethernet, and for the rest, have a tinker around, oh and make sure to enable in the bios usb 1.1 mode or otherwise your mouse wont work, and even thats buggy at times, if you dont click the buttons the mouse will play dead so you will have to do a hard reset if you havent got mac hardware plugged in that is, if there is anything else, i will update it, cause ive spent 6 hours getting this working, and my god its a pain in the butt!, but yeah if you have one of these generic boards or even have an advent, swap your gpu for the nvidia, cause you wont get it up and running with the standard ati radeon x600 pro that ships with the mbo.Yes. and No, you might need to tinker around if you have a different version.Yes. Pentium 4 HT 550 3.4Ghz and 1GB DDR SDRAM working.[edit] Shuttle Hardware NameChipsetNotesEFI/Vanilla kernel workingFully Working w/o Patch Shuttle SP35P2 V2 Intel P35 + ICH9R Using iDeneb v1.3 10.5.5
* CPU: Core 2 Quad Q9550 2.83Ghz
* Chipset: Intel P35 + ICH9R
* Memory: 4 x 2G Ram
* SATA: DVD & HD
* Video Card: Zotac Gforce GT5250 1G DDR3 (Nvidia)
* Audio: Realtek ALC888 only 2 channel works
* USB works
* Firewire works
* ESATA not tested
* LAN: Marvell 88E8056 works
* Sleep works
* Restart works
* Shutdown works
*Installed with the following checked in iDeneb 10.5.5
* Audio: ACL888
* Chipset: ICHx
* Video: Nvidia 1G Yes/Yes Yes[edit]Processors[edit]AMD Model Notes Recognized as Fully Working w/o PatchAMD Athlon 64 X2 4000+Intel Core 2 Duo 3.7GHz[Voodoo Kernel v1 Rev A]AMD Athlon 64 X2 4400+AMD Athlon 64 X2 4800+Used iDeneb distro2.5GHz UnknownYes, iDeneb with Kernel 9.4.0 Stage XNU[edit]Intel Model Notes Recognized as Fully Working w/o PatchIntel Pentium dual core E2180 2,0 GHzFully WorkingCore 2 Duo 2,0 GHzIntel Core 2 Duo E2220Fully WorkingCore Duo E2220Intel Core 2 Duo E4600 2,4 GHzFully WorkingCore 2 Duo E4600 2,4 GHzYesIntel Pentium 4 2.4 GHz, FSB 533MHz, Northwood, SSE2Fully WorkingPentium 4 2.4 GHzYesIntel Celeron D 325 2,5 GHz, FSB 533MhzFully WorkingCeleron D 325YesIntel Core 2 Duo T5250Fully Working1.5 GHz Intel Core 2 DuoIntel Core 2 Quad Q6600Fully WorkingQuad CPU [email protected]yesIntel Core 2 Duo E7300Fully WorkingCore Duo (dont remember) 2.66GHzYes[edit]Graphics Cards
Please specify if your card is AGP, Integrated, PCI or PCI-E.Also, place chip and board manufacturer in their respective column.[edit]AGP[edit]ATIHardware NameBoard-ManufacturerNotesQE / CIResolutionFully Working w/o PatchATI Radeon 9200 SE AGPATI128MBno (?)1280x1024working, altered /Library/Preferences/SystemConfiguration/com.apple.Boot.plist[edit]NvidiaHardware NameBoard-ManufacturerNotesQE / CIResolutionFully Working w/o PatchGeForce FX 5500 256MB AGPZotac
* Used iDeneb v1.3 with NVInject 256 driver.
* DVI out not tested (do not have cable or compatible monitor)Both with NVInject 256Yes. All resolutions supported by connected lcd monitorNoNvidia GeForce FX5500 256 MBNvidiaworks with Titan driverboth QE/CI works..but No translucent menu barAll Resolutions upto 1080pNoGeForce 7800GS 256MB AGPBFG
* NVInject, NVDarwin.
* Needed to use DVI to D-Sub VGA adapter to get monitor resolutions recognized on VGA analog input.
* DVI out to DVI input worked flawlessly.With NVDarwin yesYes. Full 1680x1050 on my 22' LG LCD.NoGeForce NX6200 512MB AGPMSI
* NVInject, NVDarwin. Kalyway 10.5.2 Supports QE iDeneb 10.5.5 hasnt (yet)
* DVI and VGA And Dual Monitor worked flawlessly.With NVDarwin yesYes. Full 1600x900 on my 20' Samsung LCD.yesGeForce 5600GS 128MB AGPASUS
* NVInject.
* Have not tested VGA, only have DVI monitors.
* DVI out to DVI input worked flawlessly.With NVDinjectUp to 1280x1024 no problems, all standard resolutions seem to work.NoGeForce4 MX 440 64MB AGPMSI motherboard
*Used Natit, haven't tried others.
*VGA works perfectly.NoAll resolutionsNo[edit]PCI ExpressIdeneb 1.3 Download[edit]ATIHardware NameBoard-ManufacturerNotesQE / CIResolutionFully Working w/o PatchHD 2600 ProVisiontekInstall Method: http://www.insanelymac.com/forum/lofiversion/index.php/t107526.htmlYesAllNeeds ATIRadeonX2000_Leopard patch,The previous link patch and ATI Radeon HD - 10.5.x-10.5.5 kextsHD 3870Asus EAH3870Install Method: iDeneb v1.3YesYesX1550PowerColorinstall Method: iDeneb v1.3 10.5.5 using X1300-X1550 drivers.NoMax available to my monitorNo CI/QEX2300ATIInstall Method: Don't install a driver at installation. After installation, patch ATIRadeonX1000.kext Instructions at http://www.insanelymac.com/forum/index.php?showtopic=87983YesNo. Users have claimed that 1280x800 no longer works when they patched the kextNo - Needs patch for QE/CI to work[edit]NvidiaHardware NameBoard-ManufacturerNotesQE / CIResolutionFully Working w/o PatchGeforce 6600 NX 256MBMSI/Nvideawith NVinject no QE/CI (iatkosv5)QE/CI OK after removing NVinject and instal nvkush.kext (and use EFIstring 6600)All resolutions workNoGeforce 7300SE 256MBNvidiaused NVKUSH. NVinject didn't recognize it correctlyQE/CI both workAll resolutions workNoGeForce 7300SE 512MBnVidiaNative Apple GeForce and NVDA Kexts with NVinject (iDeneb 10.5.5 install)QE/CI both workAll resolutions workNoGeForce 7300GT 256MBnVidiaNative Apple GeForce and NVDA Kexts(post-10.5.2 Graphics Update)QE/CI both workAll resolutions work, Dual displays works great with both DVI and DVI-VGA adapter.Yes, with edited com.apple.Boot.plist. Add EFI hex string using [pcwiz's OSx86 Tools Utility]7300GT 256MB DVI+VGAZotacUsed latest NVinstaller and EFI StudioHardware Accelerated CI/QEAll resolutions, dual displays works great.Needs the EFI string and NVinstaller.GeForce 7900GT 256MBnVidiaNVInject 256MB from iDeneb v1.3QE/CI both workAll resolutions work, dual displays work.Yes, with kext.GeForce 8400GS 256 MBASUS / nVidiaWorks with Efi strings, Efi Studio
DVI don't work properlyQE/CI both workAll resolutions workNoGeForce 8400GS 512MB (Silent)ASUS / nVidiaWorks with NVinject 0.2.1 512mb
DVI work (no NVCAP etc. needed)QE/CI both workAll resolutions workNoGeForce 8400GS 512MBnVidia Geforce
(Id. 0422)VGA port with NVinject 0.2.1 512 / NVdarwin 1.2.5
DVI needs NVCAP in info.plist.NVCAP to try:BAAAAAAAAgAAAAAHAAAAAA / BAAAAAAABQAAAAAHAAAAAA / BAAAAAAABgAAAAAHAAAAAAQE/CI both workAll resolutions workNoGeForce 8800GT 512MBASUSWorks with NVdarwin 1.2.5 or EFi string or DSDT by roisoftQE/CI both workAll resolutions workNoGeForce 8500GT 256MBnVidiaWorks with NVinject 256mbQE/CI both workAll resolutions workNoGeForce 8800GT 512MBGainwardWorks with EFI strings. [Use EFI Studio]QE/CI both workAll resolution workNoGeForce 8800GTS 512mbGigabyteUsed NVinject 512mbQE/CI both workAll resolution workNoGeForce 9400GT 512mbEVGAUsed Aqua-Mac's NVIDIA 9 Series Driver Installer v2 [10]QE/CI both workAll resolutions work, dual DVINoGeForce 9800GT Ultimate 518mbAsusWorks with NVinject 0.2.1. Couldn't get QE/CI to work with EFI Strings.Yes640x480 - 1600x1200 only tested, and are working.No; Needs NVinject.GTS 250 512MBeVGAWorks with EFI StringFull QE/CIFull ResolutionsNo[edit]Integrated[edit]Network Cards[edit]WirelessInterfaceStandardDeviceManufacturerNotesFully Working w/o PatchPCI802.11b/gWL-138g v2ASUSOOB with BCM4318 chipsetYesPCI802.11b/g/nDWA-542D-LinkWorks out of the box with iDeneb 10.5.5 but WPA does not work so I had to switch my network to WEP security.YesPCI802.11b/g/nDWA-552D-LinkWorks OOB with iDeneb 10.5.5, WPA works.YesPCI802.11b/g/nDWA-552D-LinkWorks OOB with iDeneb 10.5.5, WPA works but flakey (on reboot card requires running Network Diagnostic tool to connect); WEP works but it crashes the network after awhile; unencrypted works flawlessly; I want to know how the above got theirs to work using WPAYes but has issues w/ securityUSB802.11b/gTEW-424UB Rev. 3.1RTrendnetWorks flawlessly with iATKOS 5i (10.5.5) with the Realtek program installed.YesPCI802.11b/g/nTL-WN851NTP-Linkinstalled with iatkos i5. detected as airport cardYesUSB802.11b/g/nTP-Link WN723NTP-LinkNeed to download drivers from here. Click on your version of Mac OS X, download, and install. $15 - $20 wireless internet solution. Works with Kalyway 10.5.2, iDeneb 10.5.5, and iPC 10.5.6Yes[edit]Wired (Ethernet) InterfaceManufacturerNotesFully Working w/o PatchEN-9230TX-32 GBit PCIEdimaxWorks without problems out of the box! Realtek RTL8169S-32 chipset. Very cheap card! (10$ retail) with OSX 10.4 driver includedYes - Bonjour is working properly8111CRealtekInstalled this drivers [11]No3c5093comWorked without issueYes, including Bonjour8139RealtekUse driver from iAtkos 10.5.5Fully Working w/Patch8101RealtekWorks out of the box.YesWG311NetgearOOBYes, w/ Bonjour[edit] Sound Cards Ideneb 1.3 DownloadHardware Name (alphabetical)ManufacturerNotesFully Working w/o PatchSound Blaster Live!CreativeAudio out single port working using kXAudioDriver-1.2b0NoIntel HDA AudioIntelUse HDAPatcher along with a codec dump from linuxNoSound Blaster Live! Value
CT4670CreativeOutput works - using kXAudioDriver-1.2b1
Input still dosen't workNoPOD Studio GXLine6Use the Line6 monkey program to download the latest drivers. I removed AppleAzalia and put AppleHDA back in extensions. This works great on ideneb 1.3, input and output. If you are an electric guitar player, I would recommend getting this.YesAudiophile 2496M-AudioWorks! Input and Output, Volume control,with this drivers from audiodriverwriter based on ESI [email protected]NoCreative Xmod USBCreativeIt works without drivers. iDeneb 1.3YesUS-224TascamWorks with official driversYesFireface 800FirefaceWorks with official driversYes[edit] Other Accessories Hardware TypeHardware NameManufacturerNotesFully Working w/o PatchUSB TV StickTerratec T3TerratecWorks OOB in all releases of MacOS (Retail,Kaliway iDeneb) with EyeTV and EyeTv LiteYesFireware card3-Port FireWire 400Mbps PCI (VIA VT6306 chip)SitecomWorks OOBYesPen TabletBamboo FunWacomWorks as a standard mouse would w/o any drivers - no pressure sensitivity or other special features (Ink won't work, either). Installing official drivers causes problems. iDeneb on a VIA board, AMD x64 SSE2NoBluetooth DongleBTD-V201AzioWorking OOByesIntegrated BluetoothBCM-2406BroadcomWorkingyesBluetooth DongleDBT-122D-LinkWorkingyesFireware PCI card 400Chipset VIA VT6307Works without additional kexts. (During the OS installation uncheck the 'Fireware remove' )yesIdeneb Version 1.3 Retrieved from 'http://wiki.osx86project.org/wiki/index.php?title=HCL_10.5.5&oldid=67360' Ideneb 1.6 Iso This page was last modified on 25 June 2013, at 12:12. This page has been accessed 430,179 times.
